2] WEBBING, 4 pieces (melt the ends to avoid fraying)

2 of: 2 inches wide, 8-10 inches long. The webbing must be wider than a 5/8” grommet. This webbing is just like the material used as the lap belt on your Mad River Rocket sled.
2 of: 1 inch wide, 8-10 inches long. This can be varied depending how you want to attach the rigging to yourself. Some people use Velcro straps instead of carabiners.

3] CARABINERS, 2 pieces

4] RIVETS & WASHERS, 24 pieces:

8 of: 1/2 inch steel rivets. The rivets must be long enough to hold the webbing and the flattened pvc pipe together.
16 of: small washers

5] GROMMETS, 2 pieces

2 of: 5/8 inch diameter hole. The bolts must be able to fit through the grommets. These are the same grommets as on the lap belt of your Mad River Rocket Sled. Grommets often come in a grommet kit with instructions.

6] RED NYLON NUTS & BOLTS, 2 that come with the sled or any similar nut/bolt fastener you can find that works. Wingnuts are quick and easy to put on and take off.

7] BELT, Optional A simple webbing belt with loops on each hip works fine.

• more webbing
• belt buckle
• 2 plastic SLIDES, either style as shown below will work